SAE 100R1AT    DIN EN 853 1SN

According to: ISO 1436 / DIN EN 853 type 1SN / SAE J517 type SAE 100R1 AT

SAE 100R1AT Specifications and Features:  

• For Petroleum Base Hydraulic Fluids
• High Pressure, Single Steel Braid Reinforced Hydraulic Hose
• Seamless Oil Resistance Synthetic Rubber
• 1 High Tensile Steel Wire Braid
• Black, Oil, Weather and Abrasion Resistant Synthetic Rubber
• MSHA Approved
• Safety Factor:  4:1

Temperature Range:

• -40°F to 212°F  (-40°C to 100°C) 
• Intermittent Service 248°F (120°C)
• Maximum Temperature Recommended for Water Base Hydraulic Fluid 158°F (70°C)
• Maximum Temperature Recommended for Air 140°F  (60°C)
• Use Couplings HF 43, HF HY, HF BW, HF U, HF Z or HF TTC Series 

 

SKU	ID (in)	ID (mm)	OD (in)	OD (mm)	Working Pressure (psi)	Minimum Burst Pressure (psi)	Minimum Bend Radius (in)	Minimum Bend Radius (mm)	Weight (lbs/foot)
04R1-AT	1/4	6.3	0.53	13.4	3,260	13,040	3.9	100	0.153
06R1-AT	3/8	9.5	0.69	17.4	2,610	10,440	5.0	127	0.224
08R1-AT	1/2	12.7	0.81	20.7	2,320	9,280	7.0	178	0.28
10R1-AT	5/8	16.0	0.93	23.8	1,885	7,450	7.9	200	0.349
12R1-AT	3/4	19.0	1.09	27.8	1,520	6,080	9.4	240	0.434
16R1-AT	1	25.4	1.40	35.9	1,275	5,100	11.8	300	0.672
20R1-AT	1-1/4	32.0	1.71	43.8	910	3,640	16.5	419	0.874
24R1-AT	1-1/2	38.0	1.99	51.1	725	2,900	19.7	500	1.092
32R1-AT	2	50.8	2.52	64.5	580	2,320	24.8	630	1.344

 

Our SAE 100R1AT / DIN EN 853 1SN Hydraulic Hose has a greater working and burst pressure compared with only SAE 100R1AT.

 

 

 

 

 

 

Hose End Links

HF 43 Series Hose Ends

HF HY Series Hose Ends

HF U Series Hose Ends