HoseandFittings.Com Inc
 
View You Cart
Hose Hose End Fitting Tubing Clamp Coupler Valve Gauge Instrumentation
Air Management Seal Porta-Power Reel Source Metric Industry Groups
• British Brass Pipe Fittings
• Featured Products
• Brass Pipe Fittings

• Glossary of Terms
• Technical Info

• Sign in!
• Create an Account

Accepted Credit Cards
[+ $title +]

Polyurethane Tubing

Click Here to Go Back to Polyurethane Tubing


Ref.
Size		 O.D.
Nom.
in.		 I.D.
Nom.
in.		 O.D.
Tol.
in.		 I.D.
Tol.
in.		 Wall
Thkns.
Nom.
in.		 Min.
Bend
Radius++
in.		 Min. Burst***
Pressure
PSI @ 75°
PU-02 1/8 1/16 +/- .008 +/- .005 .032 .35 400
PU-02.5 5/32 3/32 +/- .008 +/- .005 .032 .47 400
PU-03 3/16 1/8 +/- .008 +/- .005 .032 .55 400
PU-04-063 1/4 1/8 +/- .008 +/- .005 .062 .75 400
PU-04-047 1/4 .159 +/- .008 +/- .005 .045 .75 250
PU-05-031 5/16 1/4 +/- .010 +/- .010 .031 1.38 100
PU-05-063 5/16 3/16 +/- .010 +/- .010 .062 .95 330
PU-06 3/8 1/4 +/- .010 +/- .010 .062 1.5 330
PU-08 1/2 3/8 +/- .010 +/- .010 .062 1.97 330
Ref.
Size		 O.D.
Nom.
mm.		 I.D.
Nom.
mm.		 O.D.
Tol.
mm.		 I.D.
Tol.
mm.		 Wall
Thkns.
Nom.
mm.		 Min.
Bend
Radius++
mm.		 Min. Burst***
Pressure
PSI @ 75°
PE-04MM 4 2.5 +/- .2 +/- .2 .75 12 28/400
PE-05MM 5 3 +/- .2 +/- .2 1 15 28/400
PE-06MM 6 4 +/- .2 +/- .2 1 18 28/400
PE-08MM 8 6 +/- .3 +/- .3 1 24 23/330
PE-10MM 10 7 +/- .3 +/- .3 1.5 40 23/330
PE-12MM 12 8 +/- .3 +/- .3 2 48 23/330

++ Specified minimum bend radius is for minimal tube flattening.
*** The safety factor adopted set the minimum bursting pressure at four times the working pressure. Always remember that the bursting and working pressure data listed are determined at 75°F (24°C).

Polyurethane Tubing 95 Durometer (Ether Based)

Ether based tubing has the characteristics of an elastomer with good elongation and recovery along with many of the desirable properties of thermoplastics.

  • Most flexible
  • Kink resistant
  • Broad range of chemical resistance
  • Toughest
  • Excellant abrasion resistance
  • Excellant oxidation & ozone resistance


    • Temperature Range: -40 to 180°F
    HARDNESS: 95 SHORE A (ASTM D 785)

    POLYURETHANE TUBING CHEMICAL COMPATIBILITY CHART
    The information given in this chart should be used as a guide only. Our laboratory
    testing does not take into consideration possible variations of conditions during
    effective service. Please refer to the raw material manufacturer website for more information.
    Acetate Solvents Limited Diesel Fuel Excellant Moisture Limited
    Acetic Acid (10%) Limited Ethanol Limited Naphtha Excellant
    Acetone Unsuitable Ether Limited Natural Gas Excellant
    Acetylene Excellant Ethyl Alcohol Limited Nickel Chloride Excellant
    Alum Excellant Ethyl Acetate Limited Nitric Acid Unsuitable
    Aluminum Chloride Excellant Ethyl Chloride Excellant Nitrogen Excellant
    Ammonia Gas Excellant Formaldehyde Excellant Oleic Acid Limited
    Ammonia Liquid Limited Formic Acid Unsuitable Oxygen Excellant
    Ammonium Chloride Excellant Freon 12-22-502 Excellant Ozone (cold) Unsuitable
    Ammonium Nitrate Limited Gas Oil Limited Paints Limited
    Amyl Acetate Limited Gasoline Excellant Petroleum (raw) Excellant
    Barium Chloride Excellant Glucose Excellant Phenol Unsuitable
    Benzene Chloride Unsuitable Glycerin Excellant Potassium Chloride Unsuitable
    Benzine (Benzoyl) Unsuitable Glycol Excellant Potassium Cyanide Excellant
    Borax Unsuitable Hydraulic Oil Excellant Propane Excellant
    Boric Acid Limited Hydrogen Excellant Sodium Bisulphate Excellant
    Butane Excellant Iron Chlorine Excellant Sodium Chloride Excellant
    Butilic Alcohol Limited Kerosene Excellant Sodium Nitrate Excellant
    Butyl Acetate Unsuitable Lactid Acid Unsuitable Sulphides Limited
    Calcium Hydroxide Unsuitable LPG (liquid gas) Excellant Sulphuric Chloride Limited
    Carbonic Acid Excellant Lubricating Oils Excellant Sulphuric Hydrogen Limited
    Carbonic Dioxide Excellant Magnesium Chloride Excellant Toluene (Toluol) Unsuitable
    Carbonic Oxide Unsuitable Mercuric Chloride Excellant Trichlorethylene Unsuitable
    Chloro Gas Unsuitable Mercury Excellant Xilene Unsuitable
    Chromic Acid Unsuitable Methylic Limited Zinc Chloride Limited
    Citric Acid Excellant Mineral Oil Excellant    
    Cyanide Unsuitable        
    Contact Us • Frequently Asked Questions • Add to Favorites