2-Bolt Type 2-Finger Boss Clamp Features & Sizing
- The Bolts Used in the Boss Interlocking Clamps are Not Standard Bolts. They Vary from Standard Bolts in Their Length, Diameter, Overall Thread Length and Material Hardness.
- These Bolts Can Be Retorqued, But it is Not Recommended That the Bolts or Clamps Be Reused, as They Are Designed for a Single Bend Only.
- Torque Values for Clamps are Based on Dry Bolts. The Use of Lubricants on Bolts Will Adversely Effect Clamp Performance. Do Not Lubricate Nuts and Bolts.
- Recommended Torque Rating in Ft./Lbs.
2-Bolt Type 2-Finger Boss Clamp
Part # | Hose O.D. Range | Hose I.D. | Torque (ft-lbs) | |
---|---|---|---|---|
From: | To: | |||
2B-04036 | 36/64″ | 42/64″ | 1/4″ | 6 |
2B-06044 | 44/64″ | 56/64″ | 3/8″ | 6 |
2B-08052 | 52/64″ | 60/64″ | 1/2″ | 6 |
2B-08060 | 60/64″ | 1-4/64″ | 1/2″ | 12 |
2B-08068 | 1-4/64″ | 1-12/64″ | 1/2″ | 12 |
2B-12074 | 1-10/64″ | 1-20/64″ | 3/4″ | 21 |
2B-12084 | 1-20/64″ | 1-32/64″ | 3/4″ | 21 |
2B-12096 | 1-32/64″ | 1-44/64″ | 3/4″ | 21 |