BOSS Male Pipe Hose Ends




If a NPT Male Pipe hose end that swivels isn’t necessary for installation, a rigid BOSS hose barb is the inexpensive way to create your hose assembly.  The NPT Male pipe thread is the same size as the hose ID.




Match this up with a BOSS Clamp and you’ve created an assembly the will work on a steam line up to 250 psi or an air line up to 600 psi.  Maximum operating temperature is 450°F.

For the hose assembly you are making, we use a 2 bolt BOSS clamp.  The lip of the clamp fits in the ring on the hose bard holding the hose barb in the hose for a good assembly.  




Copyright © 2024. All Rights Reserved.