Stainless Hardware Standard Beta Clamps with Aluminum Cushion
- Aluminum Cushions are used in Higher Heat Applications up to 500°F
- Stainless Hardware
- Recommended for Systems with Less than 1500 psi without Dynamic Loads
- Use for Standard Hydraulics, General Pipe Construction, Electrical Cables, and General Duty Piping Applications Subject to Moderate Levels of Shock and Vibration

D | Group | Tube* | Pipe* | Metric* | Dimensions – inch (mm) | Bolt | ||||
---|---|---|---|---|---|---|---|---|---|---|
A1 | A2 | A3 | H1 | H2 | ||||||
0.250 | 1 | 1/4″ | – | – | 0.78 (20) |
1.34 (34) |
1.41 (36) |
0.62 (16) |
1.25 (32) |
1/4″-20 x 1-1/4″ |
0.375 | 3/8″ | – | – | |||||||
– | – | – | – | |||||||
0.405 | – | 1/8″ | – | |||||||
– | – | – | – | |||||||
– | – | – | – | |||||||
0.500 | 2 | 1/2″ | – | – | 1.02 (26) |
1.57 (40) |
1.65 (42) |
0.76 (19.5) |
1.54 (39) |
1/4″-20 x 1-3/8″ |
0.540 | – | 1/4″ | – | |||||||
0.625 | 5/8″ | – | – | |||||||
0.675 | – | 3/8″ | – | |||||||
– | – | – | – | |||||||
– | – | – | – | |||||||
– | – | – | – | |||||||
0.750 | 3 | 3/4″ | – | – | 1.29 (36) |
1.96 (50) |
2.04 (52) |
0.80 (20.5) |
1.61 (41) |
1/4″-20 x 1-1/2″ |
0.840 | – | 1/2″ | – | |||||||
0.875 | 7/8″ | – | – | |||||||
1.000 | 1″ | – | – | |||||||
– | – | – | – | |||||||
1.000 | 1″ | – | – | |||||||
1.050 | 4 | – | 3/4″ | – | 1.57 (40) |
2.28 (58) |
2.36 (60) |
0.94 (24) |
1.88 (48) |
1/4″-20 x 1-3/4″ |
1.125 | 1-1/8″ | – | – | |||||||
– | – | – | – | |||||||
1.250 | 5 | 1-1/4″ | – | – | 2.04 (52) |
2.75 (70) |
2.83 (72) |
1.25 (32) |
2.52 (64) |
1/4″-20 x 2-1/2″ |
1.315 | – | 1″ | – | |||||||
1.500 | 1-1/2“ | – | – | |||||||
1.660 | – | 1-1/4″ | – | |||||||
– | – | – | – | |||||||
1.750 | 6 | 1-3/4″ | – | – | 2.59 (66) |
3.38 (86) |
3.46 (88) |
1.41 (36) |
2.83 (72) |
1/4″-20 x 2-3/4″ |
1.900 | – | 1-1/2″ | – | |||||||
2.000 | 2″ | – | – | |||||||
7 | – | – | – | 3.70 (94) |
4.75 (121) |
4.81 (122) |
2.00 (51) |
4.05 (103) |
1/4″-20 x 4″ |
