Dixon F Series Pre-formed Center Punch Type Clamps

Features & Sizing

F-Group-200

 

  • Install With F1, F38, F40, and F100 Punch Style Tools
  • On Stainless Clamps, Bands are 300 Series Stainless and Buckles are 302 Stainless
  • Preformed Clamps are Double Wrapped and Formed to a Given Diameter
  • Used Primarily Where One End of the Hose or Article is Free to Allow the Clamps to be Slid Over the Hose End Before the Fitting is Inserted
  • All Clamps May Be Pulled Down to a Smaller Diameter But Cannot Be Adjusted to a Larger Diameter

punch tool

Double-Wrapped, Triple Punched, Holds Permanently

 

Galvanized Stainless Steel Clamp ID Band Width
F3 FS3 13/16″ 3/8″
F311 FS311 1-3/8” 3/8″
F4 FS4 1” 5/8″
F5 FS5 1-1/4″ 5/8″
F6 FS6 1-1/2″ 5/8″
F7 FS7 1-3/4” 5/8″
F8 FS8 2″ 5/8″
F9 FS9 2-1/4″ 5/8″
F10 FS10 2-1/2″ 5/8″
F11 FS11 2-3/4″ 5/8″
F12 FS12 3″ 5/8″
F14 FS14 3-1/2″ 5/8″
F16 FS16 4″ 5/8″
F18 FS18 4-1/2″ 5/8″
F20 FS20 5″ 5/8″
F24 FS24 6″ 5/8″
F28 FS28 7″ 5/8″
F32 FS32 8″ 5/8″

HoseandFitings.Com Logo

Copyright © 2020. All Rights Reserved.