Dixon King Cable™ Safety Cable
Features:
- Must be Installed in the Extended Position (No Slack)
- Cable Reaches Across Hose Fittings to Provide Standby Safety for Hose
- Spring-Loaded Loops in the Cable Ends Open Easily to Pass Over the Couplings for a Firm Grip on the Hose
- No Tools Needed – Easy to Install and Remove
- Cable Shipped with Safety Restraint Labels Attached
- Highly Resistant to Rust and Corrosion
- Hose-to-Hose or Hose-to-Rigid Outlet
- Maximum Operating Pressure: 200psi
- Minimizes Damage to Equipment and Injuries to Operators in the Event Hose, Couplings or Clamps Fail, or there is an Accidental Separation of the Assembly
Hose-to-Tool Service
| Steel SKU | Stainless SKU | Hose ID (Inch) | Cable (Inch) | Length (Inch) |
| WSR1 | WSR1SS | 1/2 – 1 1/4 | 1/8 | 20 1/4 |
| WSR3 | – | 1/2 – 2 | 3/16 | 28 |
| WSR2 | WSR2SS | 1 1/2 – 3 | 1/4 | 38 |
| WSR4 | – | 4 | 3/8 | 44 |
Hose to Hose Service
| Steel SKU | Stainless SKU | Hose ID (Inch) | Cable (Inch) | Length (Inch) |
| WB1 | WB1SS | 1/2 – 1 1/4 | 1/8 | 20 1/4 |
| WB3 | – | 1/2 – 2 | 3/16 | 28 |
| WA2 | WA2SS | 1 1/2 – 3 | 1/4 | 38 |
| WA4 | – | 4 | 3/8 | 44 |
King Cable™ Options
| SKU | Hose ID (Inch) | Cable (Inch) | Description |
| WSR1C | 1/2 – 1 1/4 | 1/8 | WSR1 w/Safety Clip & Lanyard |
| WB1C | 1/2 – 1 1/4 | 1/8 | WB1C w/Safety Clip & Lanyard |
| WSR1E | 1/2 – 1 1/4 | 1/8 | WSR1 w/Stainless Steel Safety Marine Eye |
| WA2B | 1 1/2 – 3 | 1/4 | WA2 w/Bronze Ferrule for special Environmental Conditions |
