Stainless Pinch-On Stepless Clamp Features & Sizing

Stepless-200

 

  • Once Installed and Clamped Tampering is Easily Visable
  • Clamps are Not Reusable
  • They Should Not be Pried Open, Doing So Renders The Clamp Nonfunctional
  • Ensured Clamping Seal 
  • For Low Durometer or Thin-Walled Hose/Tubing 
  • Smooth Inner Band Prevents Damage to The Hose While the Tongue-In-Groove Design Provides a 360° Seal
  • No Steps or Gaps Inside the Clamp
  • Clamps Hold Against Pressure, Vibration and Material Shrinkage Due to Temperature Changes or Aging
  • Built-In Spring Action Permits the Clamp to Breathe Without Loosening
  • When Ordering, Select the Nominal Size Nearest to, But Always Larger Than, the Outside Diameter of the Material to be Clamped
  • The Outside Diameter Should be Determined With Connection Fully Assembled

 

 

 

304 Stainless Steel Nominal Size Range Closed Range Open
0228-0275SEC 9/32″ 0.228″ 0.275″
0307-0374SEC 3/8″ 0.307″ 0.374″
0378-0445SEC 7/16″ 0.378″ 0.445″
0425-0524SEC 1/2″ 0.425″ 0.524″
0453-0551SEC 35/64″ 0.453″ 0.551″
0472-0571SEC 9/16″ 0.472″ 0.571″
0520-0618SEC 5/8″ 0.520″ 0.618″
0571-0669SEC 11/16″ 0.571″ 0.669″
0654-0779SEC 3/4″ 0.654″ 0.779″
0701-0827SEC 13/16″ 0.701″ 0.827″
0942-1068SEC 1 1/16″ 0.942″ 1.068″
1000-1120SEC 1 1/8″ 1″ 1.120″
1119-1245SEC 1 1/4″ 1.119″ 1.245″
1230-1360SEC 1 3/8″ 1.230″ 1.360″

HoseandFitings.Com Logo

Copyright © 2020. All Rights Reserved.