SAE 100R1AT-HT DIN EN 853 1SN
According to ISO1436/DIN EN 853 Type 1SN/SAE J517 Type SAE 100R1 AT
SAE 100R1AT Specifications and Features:
- For Petroleum Base Hydraulic Fluids
- High Pressure, Single Steel Braid Reinforced Hydraulic Hose
- Seamless Oil Resistance Synthetic Rubber
- 1 High Tensile Steel Wire Braid
- Blue, Oil, Weather and Abrasion Resistant Synthetic Rubber
- MSHA Approved
- Safety Factor: 4:1
Temperature Range:
- -40°F to 257°F (-40°C to 125°C)
- Intermittent Service 302°F (150°C)
- Maximum Temperature Recommended for Water Base Hydraulic Fluid 248°F (120°C)
- Maximum Temperature Recommended for Air 140°F (60°C)
- Use Couplings HF 43, HF HY, HF BW, HF U, HF Z or HF TTC Series
SKU | ID (in) | OD (in) | Working Pressure (psi) | Minimum Burst Pressure (psi) | Minimum Bend Radius (in) | Weight (lbs/foot) |
04R1-AT-HT | 1/4 | 0.53 | 3,330 | 13,200 | 3.9 | 0.153 |
06R1-AT-HT | 3/8 | 0.69 | 2,700 | 10,800 | 5.0 | 0.224 |
08R1-AT-HT | 1/2 | 0.81 | 2,400 | 9,600 | 7.0 | 0.28 |
10R1-AT-HT | 5/8 | 0.93 | 1,900 | 7,600 | 7.9 | 0.349 |
12RA-AT-HT | 3/4 | 1.09 | 1,600 | 6,400 | 9.4 | 0.434 |
16R1-AT-RT | 1 | 1.40 | 1,300 | 5,200 | 11.8 | 0.672 |
20R1-AT-HT | 1 1/4 | 1.71 | 920 | 3,680 | 16.5 | 0.874 |
24R1-AT-HT | 1 ½ | 1.99 | 730 | 2,920 | 19.7 | 1.092 |
32R1-AT-HT | 2 | 2.52 | 580 | 2,320 | 24.8 | 1.344 |
Our SAE 100R1AT / DIN EN 853 1SN Hydraulic Hose has a greater working and burst pressure compared with only SAE 100R1AT.
Hose End Links
HF 43 Series Hose Ends
HF HY Series Hose Ends
HF U Series Hose Ends