Build A Hose

SAE 100R13 Hydraulic Hose

According to: ISO 3862 / EN 856 type 4SH / SAE 100R13 / SAE 100R15 on 3/4″ size

According to: ISO 3862 / EN 856 type 4SH / SAE 100R13 on 1″ size

According to: ISO 3862 / EN 856 type R13 / SAE J517 type R13 on Balance

Very High Pressure, Four or Six Steel Wire Spirals Reinforced Hydraulic Hose

 

Application Hydraulic Very High Pressure, 4 or 6 Steel Wire Spirals Reinforced Hose for Petroleum Base Hydraulic Fluids
Inner Tube Seamless Oil Resistant Synthetic Rubber
Reinforcement 4 or 6 Spirals of High Tensile Steel Wire
Cover Black, Oil, Weather and Abrasion Resistant Synthetic Rubber MSHAA Approved
Satety Factor 4:1
Temperature Range -40°F to 212°F (-40°C to 100°C) Intermittent Service 248°F (120°C) Maximum Temperature for Water Base Hydraulic Fluids 158°F (70°C) Maximum Temperature Recommended for Air 140°F (60°C)
Couplings HF 78 Series

 

SKU Inside Diameter (inch) Outside Diameter (inch) Working Pressure (psi) Burst Pressure (psi) Bend Radius (inch) Weight (pounds per foot)
12-4SH 3/4 1.21 6,090 24,360 4.7 1.05
16-4SH 1 1.48 5,500 22,000 5.9 1.41
20R13 1 1/4 1.94 5,075 20,300 12.8 2.62
24R13 1 1/2 2.24 5,075 20,300 15.2 3.34
32R13 2 2.79 5,075 20,300 19.3 4.77

HoseandFitings.Com Logo

Copyright © 2023. All Rights Reserved.