4-Bolt 2-Finger Boss Clamp Features & Sizing
- The Bolts Used in the Boss Interlocking Clamps are Not Standard Bolts.
- They Vary from Standard Bolts in Their Length, Diameter, Overall Thread Length and Material Hardness.
- These Bolts Can be Retorqued, But it is Not Recommended That The Bolts or Clamps Be Reused, as They Are Designed For a Single Bend Only.
- Torque Values for Clamps are Based on Dry Bolts. The Use of Lubricants on Bolts Will Adversely Effect Clamp Performance. Do Not Lubricate Nuts and Bolts.
- Recommended Torque Rating in Ft./Lbs.
4-Bolt Type with 2 Finger Boss Clamp
| Part # | Hose O.D. Range | Hose I. D. | Torque (ft-lbs) | |
|---|---|---|---|---|
| From: | To: | |||
| 4B2F-08058 | 58/64″ | 1-2/64″ | 1/2″ | 6 |
| 4B2F-16098 | 1-34/64″ | 1-46/64″ | 1″ | 21 |
| 4B2F-16108 | 1-44/64″ | 1-60/64″ | 1″ | 21 |
| 4B2F-16124 | 1-60/64″ | 2-8/64″ | 1″ | 21 |
| 4B2F-20096 | 1-32/64″ | 1-50/64″ | 1-1/4″ | 40 |
| 4B2F-20114 | 1-50/64″ | 2-6/64″ | 1-1/4″ | 40 |
| 4B2F-20136 | 2-8/64″ | 2-24/64″ | 1-1/4″ | 40 |
| 4B2F-24116 | 1-52/64″ | 2″ | 1-1/2″ | 40 |
| 4B2F-24128 | 2″ | 2-14/64″ | 1-1/2″ | 40 |
| 4B2F-24140 | 2-12/64″ | 2-24/64″ | 1-1/2″ | 40 |
| 4B2F-24152 | 2-24/64″ | 2-36/64″ | 1-1/2″ | 40 |
| 4B2F-24164 | 2-36/64″ | 2-48/64″ | 1-1/2″ | 40 |
| 4B2F-32150 | 2-22/64″ | 2-34/64″ | 2″ | 60 |
| 4B2F-32160 | 2-32/64″ | 2-50/64″ | 2″ | 60 |
| 4B2F-32176 | 2-48/64″ | 3-4/64″ | 2″ | 60 |
| 4B2F-32198 | 3-6/64″ | 3-28/64″ | 2″ | 60 |
| 4B2F-40198 | 3-6/64″ | 3-28/64″ | 2-1/2″ | 60 |
| 4B2F-40224 | 3-32/64″ | 3-60/64″ | 2-1/2″ | 150 |
| 4B2F-48224 | 3-32/64″ | 3-60/64″ | 3″ | 150 |
| 4B2F-48244 | 3-52/64″ | 4-4/64″ | 3″ | 150 |
| 4B2F-48260 | 4-4/64″ | 4-28/64″ | 3″ | 200 |
