DIN EN 856 type 4SH Hydraulic Hose
According to: ISO 3862 / EN 856 type 4SH / SAE 100R13 / SAE 100R15 on 3/4″ size
According to: ISO 3862 / EN 856 type 4SH / SAE 100R13 on 1″ size
According to: ISO 3862 / EN 856 type 4SH on 1-1/4″ size
Very High Pressure, Four Steel Wire Spirals Reinforced Hydraulic Hose
Application | Hydraulic Very High Pressure, 4 Steel Wire Spirals Reinforced Hose for Petroleum Base Hydraulic Fluids |
Inner Tube | Seamless Oil Resistant Synthetic Rubber |
Reinforcement | 4 Spirals of Very High Tensile Steel Wire |
Cover | Black, Oil, Weather and Abrasion Resistant Synthetic Rubber MSHAA Approved |
Satety Factor | 4:1 |
Temperature Range | -40°F to 212°F (-40°C to 100°C) Intermittent Service 248°F (120°C) Maximum Temperature for Water Base Hydraulic Fluids 158 F (70 C) Maximum Temperature Recommended for Air 140 F (60 C) |
Couplings | HF 4SH Series |
SKU | Inside Diameter (inch) | Outside Diameter (inch) | Working Pressure (psi) | Burst Pressure (psi) | Bend Radius (inch) | Weight (pounds per foot) |
10-4SH | 5/8 | 1.13 | 6,090 | 24360 | 9.5 | 0.97 |
12-4SH | 3/4 | 1.21 | 6,090 | 24,360 | 4.7 | 1.05 |
16-4SH | 1 | 1.48 | 5,500 | 22,000 | 5.9 | 1.41 |
20-4SH | 1 1/4 | 1.75 | 4,700 | 18,800 | 12.8 | 1.73 |