SAE 100R14 Hose

Crimp Specifications for 91N-SS Stainless Steel Series Ends

91N-SS Crimp Specific Diagram - 300 

Hose

Hose ID (in) Nominal ID

Crimp Length (in)

Crimp Diameter (in)

-04 (1/4″) 0.187 0.643 0.355
-05 (5/16″) 0.250 0.500 0.415
-06 (3/8″) 0.312 0.664 0.505
-08 (1/2″) 0.406 0.406 0.585
-10 (5/8″) 0.500 0.714 0.730
-12 (3/4″) 0.625 0.830 0.810
-16 (1″) 0.875 0.945 1.055
The Crimp Specifications are Based on the Inside Diameters Listed.  The Crimp Specifications are Approximate.  HnF Recommends Testing.  Failure to Follow Recommendations May Result in Personal Injury or Property Damage.  Please Contact a HnF Representative if You are in Doubt of Recommended Crimp Diameters.  HnF and PCC Disclaims Any Liability Due to Improper Crimping.

HoseandFitings.Com Logo

Copyright © 2020. All Rights Reserved.