FlareTite

 

FlareTite Seal Installation

Flaretite InstallFlaretite Seals are Easy to Install in any Standard Hydraulic or Pneumatic JIC Fitting
  • Open the Fitting and Snap the FlareTite Seal onto the Male End of the Flare.  The Three Unique Tabs will Hold the Seal in Place During Installation.
  • Tighten to the Fitting Manufacturer’s Required Torque Setting.  A Leak-Free and Maintenance Free Connection.

 

 

Flaretite Install Constant Force

Installed Seal - 200 Wide

 

hoseandfittingscom_275

 

Copyright © 2020. All Rights Reserved.