Full Port Ball Valve w/Locking Handle

Quality:

24 hour 100% Seal Test Guaranteed
Dual Sealing System Allows Valve to be Operated in Either Direction Making Installation Easier
No Metal-to-Metal Moving Parts
No Maintenance Ever Required
Handle Clearly Shows Ball Position
Silicone-Free Lubricant on All Seals
Chrome Plated Brass Ball For Longer Life
Handle Stops on Body to Avoid Stresses at Stem

Body:

Hot Forged and Blasted, Unplated Brass Body and Cap Sealed with Loctite® or Equivalent Thread Sealant
Finest Brass According to EN 12165 and EN 12164 (Formerly DIN 17660 and UNI 5705-65) Specifications

Stem:

Blowout-Proof Nickel Plated Brass Stem
Two FPM O-Rings at the Stem for Maximum Safety

Seals:

Pure PTFE Self-Lubricating Seats with Flexible-Lip Design

Threads:

NPT Taper ANSI B.1.20.1 Female by Female Threads

Flow:

Full Port to DIN 3357 for Maximum Flow

Handle:

Geomet® Carbon Steel Handle with Thick PVC Dip Coating. Handle Coating Offers Both Thermal and Electrical Protection
Handle Removable with Valve in Service

Working Pressure:

600 psi Up to 2″, 450 psi Over 2″
Non-Shock Cold Working Pressure

Working Temperature:

-40° F to +350° F

Options Up To 2″ Size:

Stem Extension
T-Handle
AISI 430 Stainless Steel Handle
Oval Lockable Handle up to 2″, Round Over 2″
Patented Locking Device for Valves up to 4″

*Dimensions in Inches

BV95LH	04	06	08	12	16	20	24	32	40	48	64
D	1/4	3/8	1/2	3/4	1	1-1/4	1-1/2	2	2-1/2	3	4
DN	0.314	0.393	0.590	0.787	0.984	1.259	1.574	1.968	2.559	3.149	3.937
I	0.472	0.472	0.610	0.669	0.826	0.905	0.905	1.043	1.260	1.377	1.633
L	1.771	1.771	2.322	2.519	3.188	3.661	4.015	4.763	6.141	6.968	8.504
G	0.885	0.885	1.161	1.259	1.594	1.830	2.007	2.381	3.070	3.484	4.252
A	3.228	3.228	3.937	4.724	4.724	6.220	6.220	6.220	10.039	10.039	10.039
H	1.563	1.563	1.695	1.988	2.153	2.988	3.236	3.500	5.196	5.511	6.062
CH	0.787	0.787	0.984	1.220	1.574	1.929	2.125	2.696	3.346	3.897	4.921