Hi Torque Stainless Steel Worm Gear Clamps

Features & Sizing

CT_Clamp_200

  • Withstands More Than Three Times The SAE Torque Requirements for Worm-Driven Clamps
  • Eight Screw Threads are Engaged in the Band Simultaneously for Incredible Torquing Drive (over 90 in. lbs.)
  • Excellent Sealing Pressure and Vibration Resistance
  • Torque Ratings Correspond to the Torque Rating of the Screw of the Clamp and Are Not an Indication of the Working Pressure of Any Hose Assembly Installed with This Clamp
  • Band Width: 5/8 inch
  • Band and Housing:  300 Series Half Hard Stainless Steel
  •  410 Stainless Steel Slotted Hex Screw Head Design

 
 

Part # Hose OD Range
WGHTM-200SS 1-1/4″ – 2-1/8″
WGHTM-250ESS 1-1/4″ – 2-5/8″
WGHTM-250SS 1-3/4″ – 2-5/8″
WGHTM-300ESS 2-1/8″ – 4-1/8″
WGHTM-300SS 2-1/4″ – 3-1/8″
WGHTM-350SS 2-3/4” – 3-5/8”
WGHTM-400SS 3-1/2” – 4-1/8”
WGHTM-450SS 3-3/4” – 4-5/8”
WGHTM-500ESS 4” – 6-1/8”
WGHTM-500SS 4-1/4″ – 5-1/8″
WGHTM-550SS 4-3/4 – 5-5/8”
WGHTM-600SS 5-1/4” – 6-1/8”
WGHTM-650SS 5-3/4” – 6-5/8”
WGHTM-700ESS 6-1/8” – 9-1/8”
WGHTM-700SS 6-1/4 – 7-1/8”
WGHTM-750SS 6-3/4 – 7-5/8”
WGHTM-800SS 7-1/4” – 8-1/8”
WGHTM-850SS 7-3/4 – 8-5/8”
WGHTM-900SS 8-1/4” – 9-1/8”

HoseandFitings.Com Logo

Copyright © 2024. All Rights Reserved.