Hosetract Oxygen/Acetylene Hose Reel with Rear Floor Mount
Features: 
- Reel is Ideally Applied When Space and Safety is Required in the Welding and Cutting Area
- The Reel is Capable of Storing and Dispensing 50′ Length of Twin Siamese Welding Hose
- The Exclusive Dual Hex was Designed by the Original Designer of This Dual Body Concept
- The Major Advantage of the Swivel Design is That in the Event of an O-Ring Failure, the Gases will go to Atmosphere Instead of Mixing
- Safety Banded Drive Spring
- The Swivel is Marked for the Acetylene Side with Notches on the Hex Nuts for Easy Identification
- Beaded Edges on Spool Prevents Hose Damage or Injury to Operator
- 8-Position Guide Arm
- Oxygen Inlet 1/4″ FPT
- Acetylene Hose 1/4″ FPT
- Mounting Slots 1/2″ Wide x 3/4″ Deep for Maximum 7/16″ Bolt
- Maximum Temperature 200°F
| SKU | Operating Pressure (psi) | Hose ID (in) | Hose Length (ft) | Weight (lbs) |
| COA-200-RM ♦ | 1000 | 1/4 | – | 43 |
| COA-250-RM | 200 | 1/4 | 50 | 54 |
| UTL-200-OA-RM ♦ | 1000 | 1/4 | – | 36 |
| UTL-250-OA-RM | 200 | 1/4 | 50 | 44 |
COA Models are the C Series- Heavy Duty Standard Reels
UTL Models are The Unitract™ Series – Lighter Duty Reels NOT designed for Truck Mount Applications
♦ Models With OUT Hose
