Punch Type Clamps

Features & Sizing

F-Group-200

 

  • Preformed Clamps are Double Wrapped and Formed to a Given Diameter
  • Used Primarily Where One End of the Hose or Article is Free to Allow the Clamps to be Slid Over the Hose End Before the Fitting is Inserted
  • All Clamps May Be Pulled Down to a Smaller Diameter But Cannot Be Adjusted to a Larger Diameter

punch tool

Double-Wrapped, Triple Punched, Holds Permanently

 

Galvanized Stainless Steel Clamp ID Band Width
PT01306 PTSS003 13/16″ 3/8″
PT01606 PTSS311 1-3/8” 3/8″
PT01610 PTSS004 1” 5/8″
PT02010 PTSS005 1-1/4″ 5/8″
PT02206 PTSS006 1-1/2″ 5/8″
PT02410 PTSS007 1-3/4” 5/8″
PTO2810 PTSS008 2″ 5/8″
PT03206 PTSS009 2-1/4″ 5/8″
PT03210 PTSS010 2-1/2″ 5/8″
PT03610 PTSS011 2-3/4″ 5/8″
PT04010 PTSS012 3″ 5/8″
PT04410 PTSS014 3-1/2″ 5/8″
PT04810 PTSS016 4″ 5/8″
PT05610 PTSS018 4-1/2″ 5/8″
PT06410 PTSS020 5″ 5/8″
PT07210 PTSS024 6″ 5/8″
PT11210 PTSS028 7″ 5/8″
PT12810 PTSS032 8″ 5/8″

HoseandFitings.Com Logo

Copyright © 2020. All Rights Reserved.