PROTAPE® PUR-330-AS Tape Duct Hose
Applications: 
- Flexible Hose/Ducting for Gases and for Abrasive Dust, Powder, Fibers
- Printed Circuit Board Drilling Machines (PCB)
- Extraction Unit, Dust Collection Systems, Filter System, Oil Mist Extraction
- Extraction Arm
- Chemical Industry: Chemical Vapors, Vapor Return Hose at Loading Arm, Paint Steam, Spray Mist Extraction
- Explosion Hazard Area
- Textile Industry, Fiber Extraction: Spinning Machine Knitting Machine Weaving Loom Machine
- Animal Stall Animal Shed: Barn Ventilation
- Clean Room Ventilation, Semiconductor Production Machine
- Surface Preparation: Shot Blasting/Sand Blasting Recovery (Blasting Chamber), Ship Yard, Stripping Machine, Flooring Preparation Machine, Grinding Machine
- Heating Hose: Exterior Hose as Protection Hose
Features:
- Lightweight and Reinforced
- Highly Flexible + Compressible 3:1
- Abrasion – Resistant
- Microbe Resistant
- Good Resistance to Oil, Gasoline, and Chemicals
- Very Good Low Temperature Flexibility
- Flame-Retardant According to: DIN 4102-B-1
- Permanently Antistatic Wall: In Accordance with ISO 8031 Electrical and Surface Resistance < 109 Ω
- In Accordance with ATEX 2014/34/EU (1999/92ECC) and German TRGS 727 : Aspiration of Combustible Dust (Zone 22 Inside), For Conveying of Non-Flammable Liquids, for use in Zone 1 and 2 (Gases)
- Conforms to the Safety Regulations of the German Wood Trade Association
- Conforms to RoHS Guideline
- Transparent (Standard)
Temperature:
- – 40°F to 195°F
- Short Time 255°F
Patented PROTAPE® Tape Hose Design & Material
1. Spring Steel Wire Integrated in the Wall
2. Wall: Permanently Antistatic Premium Ester-Polyurethane (Pre-PUR®)
3. Wall Thickness 0.025 Inch Approximate
25 Feet of PUR-330-AS Tape Hose
| Dash Size | ID Inch (mm) | OD (in) | Pressure DIN 26057 (50% Elongation) psi | Vacuum DIN 26057 (axially fixed) | Bending Radius | Weight (lbs/ft) |
| 0100 | 1 (25) | 1.25 | 23.30 (60.65) | 15.95 (29.53) | 3/4 | 0.101 |
| 030MM | (30) | 1.46 | 19.60 (50.75) | 13.29 (29.53) | 7/8 | 0.121 |
| 0200 | 2 (50-51) | 2.28 | 11.90 (30.75) | 6.50 (25.69) | 1.30 | 0.249 |
| 0250 | 2.5 (63-65) | 2.87 | 9.20 (23.70) | 4.87 (15.36) | 1.59 | 0.309 |
| 070MM ♦ | (70) | 3.07 | 8.55 (22.05) | 4.58 (13.29) | 1.69 | 0.336 |
| 0300 | 3 (75-76) | 3.27 | 8.00 (20.60) | 4.28 (11.66) | 1.79 | 0.356 |
| 080MM ♦ | (80) | 3.46 | 7.45 (19.30) | 3.99 (10.34) | 1.89 | 0.383 |
| 0350 | 3.5 (89-90) | 3.86 | 6.65 (17.20) | 3.54 (8.27) | 2.09 | 0.423 |
| 0400 | 4 (100-102) | 4.25 | 6.00 (15.50) | 2.36 (9.15) | 2.28 | 0.45 |
| 110MM ♦ | (110) | 4.65 | 5.45 (14.05) | 2.07 (7.68) | 2.50 | 0.491 |
| 0450 | 4.5 (114-115) | 4.84 | 5.20 (13.50) | 2.07 (6.94) | 2.58 | 0.511 |
| 0500 | 5 (125-127) | 5.24 | 4.85 (12.40) | 1.92 (5.91) | 2.78 | 0.558 |
| 130MM ♦ | (130) | 5.43 | 4.65 (11.95) | 1.77 (5.46) | 2.87 | 0.578 |
| 0550 | 5.5 (140) | 5.83 | 4.30 (11.10) | 1.62 (4.72) | 3.07 | 0.618 |
| 0600 | 6 (150-152) | 6.22 | 4.00 (10.35) | 1.62 (4.13) | 3.27 | 0.665 |
| 170MM ♦ | (170) | 7.00 | 3.55 (3.25) | 1.33 (3.25) | 3.66 | 0.746 |
| 175MM ♦ | (175) | 7.20 | 3.50 (8.85) | 1.33 (3.10) | 3.76 | 0.766 |
| 0700 | 7 (178-180) | 7.40 | 3.35 (8.65) | 1.33 (2.95) | 3.86 | 0.786 |
| 0800 | 8 (200-203) | 8.19 | 3.05 (7.75) | 0.89 (3.25) | 4.25 | 0.894 |
| 225MM ♦ | (225) | 9.17 | 2.70 (6.90) | 0.74 (2.51) | 4.74 | 0.995 |
| 250MM ♦ | (250) | 10.16 | 2.40 (6.25) | 0.74 (1.92) | 5.24 | 1.102 |
| 1000 | 10 (254) | 10.31 | 2.40 (6.10) | 0.74 (1.92) | 5.31 | 1.115 |
| 300MM ♦ | (300) | 12.17 | 2.05 (5.20) | 0.59 (1.48) | 6.26 | 1.438 |
| 1200 | 12 (305) | 12.36 | 1.95 (5.10) | 0.59 (1.48) | 6.36 | 1.458 |
| 315MM ♦ | (315) | 12.76 | 1.95 (4.95) | 0.59 (1.33) | 6.56 | 1.505 |
| 350MM ♦ | (350) | 14.13 | 1.75 (4.40) | 0.59 (1.03) | 7.24 | 1.673 |
| 1400 | 14 (356) | 14.37 | 1.65 (4.35) | 0.44 (1.03) | 7.36 | 1.700 |
| 400MM ♦ | (400) | 16.10 | 1.50 (3.90) | 0.44 (0.74) | 8.23 | 1.908 |
| 450MM ♦ | (450) | 18.07 | 1.40 (3.50) | 0.44 (0.74) | 9.21 | 2.144 |
| 500MM ♦ | (500) | 20.08 | 1.25 (3.10) | 0.44 (0.59) | 10.24 | 2.950 |
♦ Non-Stock Item; Possible 2-3 week delay
50 Feet of PUR-330-AS Tape Hose
| Dash Size | ID inch (mm) | OD (in) | Pressure DIN 26057 (50% Elongation) psi | Vacuum DIN 26057 (axially fixed) | Bending Radius | Weight (lbs/ft) |
| 0100 | 1 (25) | 1.25 | 23.30 (60.65) | 15.95 (29.53) | 3/4 | 0.101 |
| 030MM * | (30) | 1.46 | 19.60 (50.75) | 13.29 (29.53) | 7/8 | 0.121 |
| 0150 | 1.5 (38) | 1.75 | 15.60 (40.25) | 10.48 (22.74) | 1.02 | 0.148 |
| 0200 | 2 (50-51) | 2.28 | 11.90 (30.75) | 6.50 (25.69) | 1.30 | 0.249 |
| 0250 | 2.5 (63-65) | 2.87 | 9.20 (23.70) | 4.87 (15.36) | 1.59 | 0.309 |
| 070MM ♦ | (70) | 3.07 | 8.55 (22.05) | 4.58 (13.29) | 1.69 | 0.336 |
| 0300 | 3 (75-76) | 3.27 | 8.00 (20.60) | 4.28 (11.66) | 1.79 | 0.356 |
| 080MM ♦ | (80) | 3.46 | 7.45 (19.30) | 3.99 (10.34) | 1.89 | 0.383 |
| 0350 | 3.5 (89-90) | 3.86 | 6.65 (17.20) | 3.54 (8.27) | 2.09 | 0.423 |
| 0400 | 4 (100-102) | 4.25 | 6.00 (15.50) | 2.36 (9.15) | 2.28 | 0.45 |
| 110MM ♦ | (110) | 4.65 | 5.45 (14.05) | 2.07 (7.68) | 2.50 | 0.491 |
| 0450 | 4.5 (114-115) | 4.84 | 5.20 (13.50) | 2.07 (6.94) | 2.58 | 0.511 |
| 0500 | 5 (125-127) | 5.24 | 4.85 (12.40) | 1.92 (5.91) | 2.78 | 0.558 |
| 130MM ♦ | (130) | 5.43 | 4.65 (11.95) | 1.77 (5.46) | 2.87 | 0.578 |
| 0550 | 5.5 (140) | 5.83 | 4.30 (11.10) | 1.62 (4.72) | 3.07 | 0.618 |
| 0600 | 6 (150-152) | 6.22 | 4.00 (10.35) | 1.62 (4.13) | 3.27 | 0.665 |
| 170MM ♦ | (170) | 7.00 | 3.55 (3.25) | 1.33 (3.25) | 3.66 | 0.746 |
| 175MM ♦ | (175) | 7.20 | 3.50 (8.85) | 1.33 (3.10) | 3.76 | 0.766 |
| 0700 | 7 (178-180) | 7.40 | 3.35 (8.65) | 1.33 (2.95) | 3.86 | 0.786 |
| 0800 | 8 (200-203) | 8.19 | 3.05 (7.75) | 0.89 (3.25) | 4.25 | 0.894 |
♦ Non-Stock Item; Possible 2-3 week delay
* Non-Stock Item; Possible delay
 |
 |
 |
 |
 |
 |
 |
 |
